verified_user
Standardful
Homechevron_rightStandardschevron_rightGB 4806.10-2025
Active — mandatory national food safety standardInternational Standardupdate Standard Updated: Sep 2025fact_check Fact checked: Nov 8, 2026

GB 4806.10-2025

National food safety standard — Coatings and coating layers for food-contact materials and articles

apartmentPublishing Organization:State Administration for Market Regulation (SAMR) / Standardization Administration of China (SAC)

Standard Introduction

GB 4806.10-2025 is China's current mandatory national food safety standard for coatings and coating layers used in food-contact materials and articles. Announced on 2 September 2025, it became effective and replaced GB 4806.10-2016 on 2 September 2026.

Manufacturers and importers should connect permitted raw materials and restrictions to the finished article and its foreseeable food, time and temperature conditions, then retain applicable migration, sensory, labelling, supplier and change-control evidence.

gavel

Mandatory Since 2 September 2026

GB 4806.10-2025 is China's current mandatory national food safety standard for coatings and coating layers used in food-contact materials and articles. It replaced GB 4806.10-2016 on 2 September 2026.

format_paint

Broader Material and Article Scope

The revision covers coating layers on products such as coated paper, metal cans, insulated drinkware and cookware, including layers that can indirectly affect food safety through the food-contact structure.

science

Use Conditions Drive the Evidence

Teams must connect permitted starting substances and restrictions to the finished coating, intended food, temperature and time, then apply the relevant migration and sensory tests to the final article.

list_alt Food-contact Coating Decisions

  • Whether the food-contact layer is a coating within GB 4806.10-2025
  • The finished article, substrate and multilayer structure
  • Permitted starting substances and applicable restrictions
  • Intended food types, contact time, temperature and repeated use
  • Overall and specific migration tests applicable to the formulation
  • Primary aromatic amine and bisphenol A controls where applicable
  • Sensory, packaging, labelling and user-information requirements
  • Supplier declarations, formulation traceability, test reports and change control

Who Needs to Comply?

groups

Manufacturers and importers of coated food-contact materials and articles for the Chinese market; suppliers of resins, additives, coatings, paper, metal packaging, cookware, drinkware and containers; brand owners, retailers, laboratories and quality or regulatory teams that approve formulations, finished articles or supplier evidence.

Key Requirements

1

Classify the Coating and Finished Article

Identify the substrate, every coating layer, direct or indirect food-contact path, article type and intended use. Determine which other GB 4806 material, additive, general-safety and test-method standards also apply.

2

Verify Starting Substances

Map resins, monomers, additives and processing aids to the permitted lists or another valid authorization. Record substance identity, purity, maximum use, residual, migration and food-type restrictions instead of relying only on a supplier trade name.

3

Define the Foreseeable Use

Specify the foods, contact duration, temperature, repeated-use conditions, filling or cooking process and consumer instructions. Use the most severe reasonably foreseeable condition when selecting compliance tests.

4

Test the Finished Coated Article

Apply the relevant sensory, overall migration and specific migration methods to representative final articles. Include controls such as total primary aromatic amine migration and bisphenol A when the formulation or standard makes them applicable.

5

Control Information and Traceability

Keep product identity, intended-use limitations, applicable standard references, supplier declarations, batch links, formulation records and test reports consistent across purchasing, production, release and customer information.

6

Manage Changes and Market Surveillance

Reassess after changes to raw materials, supplier, formula, coating weight, curing, substrate, article design or intended use. Retain samples and evidence that allow a questioned batch to be investigated and contained.

Implementation Roadmap

1
Phase 1schedule Duration: 2–4 weeks

Map articles, layers and legal scope

List each coated food-contact article, substrate, coating layer, supplier and direct or indirect food-contact path. Record the intended foods, temperatures, durations and repeated-use conditions, and identify the other GB 4806 standards and test methods that apply.

2
Phase 2schedule Duration: 3–6 weeks

Approve formulations and suppliers

Break trade-name products into resins, monomers, additives and processing aids. Verify each substance against permitted lists or another valid authorization, capture restrictions and specifications, and close gaps in supplier declarations before production release.

3
Phase 3schedule Duration: 3–8 weeks

Build the finished-article test plan

Group products only where formulation, substrate, coating weight, curing and use conditions justify it. Select food simulants and test conditions, then define sensory, overall migration and applicable specific-migration tests for representative final articles.

4
Phase 4schedule Duration: 4–10 weeks

Qualify production and product information

Confirm mixing, application and curing controls; link batches to approved formulas and test evidence; and align labels, instructions, restrictions and customer declarations with the qualified use conditions.

5
Phase 5schedule Duration: Ongoing

Release, monitor and reassess

Release only matching configurations, retain traceable records and samples, investigate complaints or surveillance findings, and trigger reassessment after relevant supplier, formulation, process, substrate, design or intended-use changes.

Compliance Checklist

0 / 12

checklist Scope and intended use

checklist Formulation and suppliers

checklist Testing and release

checklist Evidence and change control

GB 4806.10-2016 and GB 4806.10-2025

The 2025 edition is the current mandatory baseline. Use the official text and applicable test methods for final conformity decisions.

Topic2016 edition2025 editionPractical action
StatusReplaced on 2 Sep 2026Mandatory and active since 2 Sep 2026Use the 2025 edition for current China-market releases
Permitted starting materialsOfficial regulator summary cites 105 listed base materialsOfficial regulator summary cites 346 and qualifying high-molecular-weight polymersRebuild the formulation-to-authorization matrix
Article scopeEarlier coating frameworkExpanded coverage of coated articles and indirect influence through structuresMap every layer and contact path
Bisphenol A0.6 mg/kg migration limit in the regulator comparison0.05 mg/kg migration limit in the regulator comparisonConfirm formulation applicability and update the test plan
Migration conditionsMore uniform high-temperature approachConditions better differentiated by article and actual useDocument cookware, drinkware and other use scenarios separately
Primary aromatic aminesEarlier test basisCurrent supervision testing includes total migration where applicableObtain formulation information and include the test when triggered

Common Misconceptions

cancel
Myth

A coating is compliant because every ingredient appears on a positive list.

check_circle
Reality

Permitted use is conditional, and the finished article still needs to meet applicable restrictions, migration, sensory and information requirements under its foreseeable use.

cancel
Myth

A report for the liquid coating proves every coated product is compliant.

check_circle
Reality

Migration depends on the final coating, cure, substrate, article, food and use conditions. Finished-article evidence and justified product grouping are essential.

cancel
Myth

GB 4806.10-2025 is a voluntary certification scheme.

check_circle
Reality

It is a mandatory national food safety standard. It does not create a voluntary certificate or authorize a private mark.

cancel
Myth

The 2025 publication date means the standard applied immediately.

check_circle
Reality

NHC and SAMR announced it on 2 September 2025; the official implementation and replacement date was 2 September 2026.

Penalties & Enforcement

warning

GB 4806.10-2025 is a mandatory national food safety standard. The standard is not a standalone penalty schedule, but nonconforming food-contact materials or articles can trigger failed supervision testing, correction, removal from sale, recall or enforcement under China's Food Safety Law, product-quality rules and related measures. The responsible authority and consequence depend on the product and facts.

Frequently Asked Questions

Is GB 4806.10-2025 mandatory?

expand_more

Yes. It is a Chinese mandatory national food safety standard. NHC and SAMR announced it on 2 September 2025, and it became effective on 2 September 2026, replacing GB 4806.10-2016.

What products are covered?

expand_more

It applies to coatings and coating layers used in food-contact materials and articles. Official regulator guidance highlights coated paper, food and beverage cans, insulated drinkware, cookware and layers that can indirectly affect food safety. Teams must assess the complete article and contact path, not the coating trade name alone.

Does the expanded raw-material list make every listed coating compliant?

expand_more

No. A permitted starting substance still has to meet its identity, purity, use, residual and migration restrictions. The finished coated article must also meet the applicable general, sensory, migration, labelling and intended-use requirements.

What changed for bisphenol A?

expand_more

Beijing's official market-regulation explanation states that the specific migration limit for bisphenol A was reduced from 0.6 mg/kg to 0.05 mg/kg. Whether that test applies depends on the formulation and article, so laboratories need the substance and use information rather than a generic product name.

Can one test report cover an entire product family?

expand_more

Only when the grouping is technically justified. Changes in resin, additives, substrate, coating weight, curing, article geometry, food type, time or temperature can change migration and may require a different representative sample or reassessment.

Does an overseas food-contact declaration replace Chinese testing?

expand_more

No. Foreign declarations can support supplier due diligence, but they do not by themselves establish conformity with GB 4806.10-2025, the applicable Chinese positive lists, migration methods, use conditions and information requirements.

Official Documentation

View All

Implementation Timeline

description
19 Oct 2016
GB 4806.10-2016 was published as the earlier mandatory food-contact coating standard
new_releases
2 Sep 2025
NHC and SAMR announced GB 4806.10-2025 with 31 other national food safety standards
gavel
2 Sep 2026
GB 4806.10-2025 became effective and replaced the 2016 edition
fact_check
8 Nov 2026
Standardful verified the current status, implementation date and official enforcement guidance

Related Categories