verified_user
Standardful
Homechevron_rightStandardschevron_rightISO 19014-1:2026
Active — Edition 2International Standardupdate Standard Updated: October 2026fact_check Fact checked: Nov 16, 2026

ISO 19014-1:2026

Earth-moving machinery functional-safety methodology and performance requirements

apartmentPublishing Organization:International Organization for Standardization (ISO)

Standard Introduction

ISO 19014-1:2026 is Edition 2 of the functional-safety methodology for determining required performance levels for safety-related controls on earth-moving machinery defined by ISO 6165:2022. ISO published it on 9 October 2026 and withdrew the 2018 edition.

The revision is part of a coordinated five-part release covering hardware and architecture, environmental testing, software and data transmission, and function-specific performance-level tables. The official scopes state that the series is not applicable to machinery manufactured before publication and does not replace separate controls for cybersecurity, explosion protection or equipment-originated hazards.

construction

Earth-Moving Machinery Scope

Part 1 defines the methodology for determining required performance levels for safety-related controls on machinery within ISO 6165:2022.

account_tree

Five-Part System

The methodology is designed to be used with Parts 2 to 5 covering hardware and architecture, environmental testing, software and data transmission, and performance-level tables.

sync_alt

Coordinated 2026 Revision

All five parts reached publication on 9 October 2026, replacing the earlier editions and the former Technical Specification for Part 5.

list_alt 2026 Series Readiness

  • Identify machines within ISO 6165:2022 scope
  • Control the 9 October 2026 publication boundary
  • Replace mixed-edition references with an approved 2026 baseline
  • Identify safety-control functions and hazards
  • Determine required machine performance levels
  • Evaluate hardware and architecture under Part 2
  • Plan environmental evidence under Part 3
  • Control software and data transmission under Part 4
  • Use Part 5 tables where applicable
  • Address cybersecurity, explosion protection and equipment hazards through separate requirements

Who Needs to Comply?

groups

Earth-moving machinery manufacturers, control-system and component suppliers, software teams, system integrators, safety engineers, test laboratories, assessors and technical-file owners responsible for machinery defined by ISO 6165:2022. Product and jurisdiction-specific safety rules still determine whether and how the voluntary ISO series is used for market access.

Key Requirements

1

Confirm Scope and Manufacturing Date

Document that the machine is within ISO 6165:2022 scope and whether it is manufactured on or after 9 October 2026. The official scopes state that the 2026 series is not applicable to machinery manufactured before publication.

2

Establish a Coordinated Series Baseline

Use Part 1 together with the 2026 editions of Parts 2, 3, 4 and 5. Prevent projects from combining withdrawn predecessors with new parts unless a documented contractual or legal transition permits it.

3

Identify Safety-Control Functions

Define machine-control functions that control motion or mitigate hazards, distinguish them from non-safety controls, and preserve the hazard analysis and function boundaries that support the required performance level.

4

Determine and Allocate Performance Levels

Use the Part 1 methodology and, where applicable, the function-and-machine-type tables in Part 5 to establish required machine performance levels and allocate them to the relevant safety-control systems.

5

Build Evidence Across Hardware, Environment and Software

Apply Part 2 to hardware and architecture, Part 3 to environmental testing of relevant electrical and electronic components, and Part 4 to embedded software and safety-related data transmission.

6

Control Interfaces and Exclusions

Address equipment hazards, cybersecurity, explosion protection and awareness-only systems through the appropriate separate standards and legal requirements because the public ISO scopes identify important exclusions.

Implementation Roadmap

1
Step 1schedule Duration: Planning estimate: 1–3 weeks

Define machine and project applicability

Record the machine type, ISO 6165:2022 classification, intended functions, manufacturing date, target markets and controlling contracts. Separate post-publication designs from earlier machinery and identify any jurisdictional transition rule before selecting the standards baseline.

2
Step 2schedule Duration: Project estimate: 1–4 weeks

Approve the five-part baseline

Obtain controlled copies of ISO 19014 Parts 1 to 5:2026, map withdrawn references in specifications and supplier documents, and approve any justified exception to a fully coordinated 2026 baseline.

3
Step 3schedule Duration: Project estimate: 3–10 weeks

Identify functions, hazards and MPLr

Define safety-control-system boundaries, identify significant hazards caused by control-system failure, determine required machine performance levels through Part 1 and applicable Part 5 tables, and record assumptions, operating modes and interfaces.

4
Step 4schedule Duration: During product development

Develop and verify the safety controls

Allocate requirements to hardware and architecture under Part 2, environmental evidence under Part 3, and software and safety-related data transmission under Part 4. Link supplier evidence, calculations, test results, reviews and change control to each safety requirement.

5
Step 5schedule Duration: Before release and ongoing

Validate the integrated machine and maintain evidence

Validate implemented functions against the approved safety concept, close anomalies, document residual and excluded risks, obtain independent assessment where required, and keep the safety case current through configuration, supplier and software changes.

Compliance Checklist

0 / 16

checklist Scope and baseline

checklist Functions and performance levels

checklist Design and verification

checklist Interfaces and lifecycle

ISO 19014:2026 series roles

Use the five parts as a coordinated set; this table summarizes only their public ISO scopes and does not replace the normative text.

PartPrimary question2026 status
ISO 19014-1How is the required machine performance level determined?Edition 2; replaces 2018
ISO 19014-2How are hardware and architecture developed and evaluated?Edition 2; replaces 2022
ISO 19014-3What environmental evidence is required for relevant electrical and electronic components?Edition 2; replaces 2018
ISO 19014-4How are software and safety-related data transmission developed and evaluated?Edition 2; replaces 2020
ISO 19014-5Which required performance levels apply to common functions and machine types?Edition 1; replaces ISO/TS 19014-5:2021

Common Misconceptions

cancel
Myth

Buying Part 1 is enough to claim compliance with the ISO 19014 series.

check_circle
Reality

ISO's scope requires Part 1 to be used with Parts 2 to 5 for the relevant safety requirements.

cancel
Myth

The 2026 edition automatically applies retroactively to every machine in service.

check_circle
Reality

The public scopes state that the series is not applicable to machinery manufactured before publication, although contracts, modifications or law can create separate obligations.

cancel
Myth

Functional safety under ISO 19014 includes cybersecurity and explosion proofing.

check_circle
Reality

Part 4 excludes cybersecurity and Part 3 excludes explosion proofing, so separate standards and legal requirements are needed.

cancel
Myth

ISO 19014 evaluates every hazard on an earth-moving machine.

check_circle
Reality

The series addresses significant hazards caused by safety-control-system failure; hazards arising from the equipment itself require other controls and standards.

Penalties & Enforcement

warning

ISO 19014 is a voluntary International Standard and ISO does not impose penalties. Consequences can arise when a contract, procurement specification, conformity-assessment route or national machinery law requires the series or an equivalent safety case. Nonconformity can then affect acceptance, market access, liability, corrective action or recall decisions under the controlling framework.

Frequently Asked Questions

What is ISO 19014-1:2026?

expand_more

It is Edition 2 of the methodology for determining performance levels required for safety-related control-system parts on earth-moving machinery defined by ISO 6165:2022. ISO published it on 9 October 2026 and withdrew ISO 19014-1:2018.

Can ISO 19014-1 be used by itself?

expand_more

No for a complete series-based safety case. ISO's public scope says Part 1 is used with ISO 19014-2, -3, -4 and -5:2026, which address hardware and architecture, environmental testing, software and data transmission, and required performance-level tables.

Which editions does the 2026 series replace?

expand_more

The coordinated release replaces ISO 19014-1:2018, ISO 19014-2:2022, ISO 19014-3:2018, ISO 19014-4:2020 and ISO/TS 19014-5:2021. Part 5 is now an International Standard rather than a Technical Specification.

Does ISO 19014:2026 apply to existing machinery?

expand_more

The official scopes for Parts 1, 2, 4 and 5 say they are not applicable to earth-moving machinery manufactured before publication. Organizations should still check contracts, modifications, national law and the relevant conformity-assessment route before concluding that no action is needed.

Does ISO 19014 cover cybersecurity?

expand_more

Part 4 explicitly excludes cybersecurity and points users to an appropriate security standard. Safety-related communication and software remain within Part 4, but malicious-threat controls require a separate security analysis and framework.

Does the series cover explosion protection?

expand_more

Part 3 does not address explosion proofing and notes that national or regional rules can apply; its public scope points to the IEC 60079 series for information. Explosion risks therefore need a separate applicability and legal review.

Is ISO 19014 certification mandatory?

expand_more

ISO 19014 is voluntary and ISO does not certify machinery. A market rule, customer specification, contract or conformity-assessment scheme can nevertheless require it or use it as part of the safety evidence.

Official Documentation

View All

Implementation Timeline

history
2018–2022
Earlier editions of Parts 1 to 4 and ISO/TS 19014-5 establish the first-generation series
publish
9 Oct 2026
ISO publishes the coordinated 2026 editions of Parts 1 to 5 and withdraws their predecessors
event_available
From publication
The 2026 series applies to in-scope earth-moving machinery manufactured on or after publication; it is not retroactive to earlier machinery

Related Categories