verified_user
Standardful
Homechevron_rightStandardschevron_rightCanada TSD No. 139, Revision 1
Mandatory from 1 November 2026International Standardupdate Standard Updated: May 2026fact_check Fact checked: Nov 14, 2026

Canada TSD No. 139, Revision 1

New radial ply tires for motor vehicles with a GVWR of 4 536 kg or less

apartmentPublishing Organization:Transport Canada

Standard Introduction

Canada TSD No. 139, Revision 1 is the current technical standard for covered new radial-ply tires designed for motor vehicles with a gross vehicle weight rating of 4 536 kg or less. It was published and became effective on 1 May 2026 and became mandatory on 1 November 2026.

The TSD sets dimensional, marking and performance requirements and introduces the PTBC definition for winter-tire assessment. It is legally applied through the Motor Vehicle Tire Safety Regulations and must be read with those Regulations, not as a standalone voluntary standard.

tire_repair

Canadian Light-Vehicle Tire Rule

Applies through the Motor Vehicle Tire Safety Regulations to covered new radial-ply tires for motor vehicles with a GVWR of 4 536 kg or less.

science

Performance and Marking Controls

Covers dimensions, rim matching, load ratings, treadwear indicators, sidewall information, and high-speed, endurance, low-pressure, strength and bead-unseating tests.

ac_unit

Revision 1 Addresses PTBC

The change log identifies the introduction of the parasitic tread block chunking definition and related treatment for winter-tire test assessment.

list_alt Revision 1 Readiness

  • Classify tires against CMVSS 109, 119 and 139
  • Control the 1 November 2026 mandatory date
  • Match every size designation to approved rim and load information
  • Preserve representative samples and calibrated test conditions
  • Run dimensional, high-speed, endurance and low-pressure tests
  • Evaluate strength and tubeless bead-unseating resistance
  • Apply Canadian marking and tire-identification rules
  • Document PTBC treatment for qualifying winter tires

Who Needs to Comply?

groups

Tire manufacturers, importers, brand owners, testing laboratories and compliance teams supplying Canada with covered new radial-ply passenger-car or light-truck tires intended for vehicles with a GVWR of 4 536 kg or less. Scope must be checked against sections 3 to 5 of the Motor Vehicle Tire Safety Regulations because other tire classes fall under CMVSS 109 or 119.

Key Requirements

1

Classify the Tire Correctly

Confirm that the product is a covered new radial-ply tire for a vehicle with a GVWR of 4 536 kg or less and is not a class governed by CMVSS 109 or 119.

2

Control Dimensions, Rims and Ratings

Match size designation, permitted rims, inflation pressure and load rating to the TSD and the additional information requirements in the Motor Vehicle Tire Safety Regulations.

3

Meet Performance Tests

Use the specified samples, conditioning, drum, speed, load, pressure and inspection criteria for dimensions, high speed, endurance, low inflation, strength and bead unseating.

4

Apply Markings and Treadwear Indicators

Control sidewall content, placement, dimensions, tire identification, manufacturer identity and the required number and wear depth indication of treadwear indicators.

5

Implement the PTBC Revision

Update winter-tire definitions, test instructions and result review so qualifying parasitic tread block chunking is distinguished from prohibited structural failure evidence.

6

Read the TSD with the Regulation

Treat deleted or adapted TSD text together with the Motor Vehicle Tire Safety Regulations, which can replace, add to or override provisions and contain marking, records, import and defect duties.

Implementation Roadmap

1
Step 1schedule Duration: Immediate

Classify products and transition status

Separate CMVSS 139 tires from classes governed by CMVSS 109 or 119. For each covered SKU, record whether release evidence follows the previous applicable requirements or Revision 1 during the transition, then lock Revision 1 for production from 1 November 2026.

2
Step 2schedule Duration: 2–6 weeks

Control specifications and markings

Map size, rim, inflation, load, construction, treadwear-indicator and sidewall requirements to controlled drawings, moulds, master data and inspection plans. Read every adapted or deleted TSD provision with the Motor Vehicle Tire Safety Regulations.

3
Step 3schedule Duration: 4–10 weeks

Update test methods and PTBC decisions

Revise sampling, conditioning, drum, pressure, speed, load, inspection and calibration instructions for all applicable tests. Train reviewers to distinguish qualifying winter-tire PTBC from structural failures that remain prohibited.

4
Step 4schedule Duration: Before Canadian release and ongoing

Approve evidence and maintain surveillance

Link reports to the exact tire construction and production controls, resolve failures, approve Canadian markings, retain import and compliance records, and route defects or non-compliance through the required notice and reporting process.

Compliance Checklist

0 / 12

checklist Scope and dates

checklist Product and markings

checklist Testing

checklist Revision 1 and legal evidence

Which Canadian tire rule applies?

Classify the tire before using a test plan; the vehicle mass threshold alone does not answer every scope question.

ReferencePrimary scopeImplementation decision
CMVSS 109 / TSD 109New tires and specified specialty tires prescribed by section 3Check the section 3 product classes first
CMVSS 119 / TSD 119Tires for vehicles above 4 536 kg GVWR and motorcycles prescribed by section 4Use for the heavier-vehicle and motorcycle classes
CMVSS 139 / TSD 139 Rev. 1Other covered new radial-ply tires for vehicles at or below 4 536 kg GVWRRevision 1 mandatory from 1 Nov 2026
Motor Vehicle Tire Safety RegulationsCanadian incorporation, markings, records, import and defect dutiesUse with the TSD; it can add to or override reproduced text

Common Misconceptions

cancel
Myth

TSD 139 applies to every tire used on a light vehicle.

check_circle
Reality

Sections 3 and 4 prescribe other tire classes under CMVSS 109 and 119; classification must precede testing.

cancel
Myth

The effective date and mandatory compliance date are the same.

check_circle
Reality

Revision 1 became effective on 1 May 2026 but became mandatory on 1 November 2026.

cancel
Myth

PTBC means any winter-tire chunking can pass.

check_circle
Reality

Only the defined parasitic tread block chunking treatment applies; prohibited separation, cracking, broken cords and other failure evidence remain relevant.

cancel
Myth

The TSD PDF contains every Canadian legal requirement.

check_circle
Reality

The official introduction expressly requires reading it with the Motor Vehicle Tire Safety Regulations, which contain additional or overriding provisions.

Penalties & Enforcement

warning

TSD 139 is incorporated into binding Canadian regulations. Non-compliance can trigger refusal or restriction of import or sale, defect or non-compliance notices, corrective action, record and reporting duties, and enforcement under the Motor Vehicle Safety Act. The exact consequence depends on the facts and statutory powers used.

Frequently Asked Questions

When did Canada TSD 139 Revision 1 become mandatory?

expand_more

Transport Canada published Revision 1 with a publication and effective date of 1 May 2026 and a mandatory compliance date of 1 November 2026. Until the mandatory date, manufacturers could use the previous applicable requirements or Revision 1.

Which tires are covered by CMVSS 139?

expand_more

Section 5 of the Motor Vehicle Tire Safety Regulations covers radial-ply tires, other than the classes prescribed by sections 3 and 4, designed for motor vehicles with a GVWR of 4 536 kg or less manufactured on or after 1 January 1975. Product-specific classification still needs to be documented.

What changed in Revision 1?

expand_more

The official change log identifies introduction of the parasitic tread block chunking, or PTBC, definition. The revised text also recognizes qualifying PTBC evidence for winter tires in specified endurance and low-inflation visual assessments rather than automatically treating it as prohibited chunking.

Is TSD 139 a voluntary standard?

expand_more

No for covered Canadian-market tires. The Motor Vehicle Tire Safety Regulations require the prescribed class to conform to TSD 139 and section 6. The TSD must be read with the Regulations because they can add to, replace or override its provisions.

Does passing one performance test establish compliance?

expand_more

No. The document covers dimensions, construction, rim and load information, treadwear indicators, markings and multiple performance tests. The Regulations also contain tire-identification, National Safety Mark, records, import and defect obligations.

Is the optional Alpine symbol the same as Canadian certification?

expand_more

No. TSD 139 permits a qualifying winter tire to display the defined mountain-and-snowflake pictograph, but that optional marking does not replace the applicable Canadian conformity, identification, record or import requirements.

Official Documentation

View All

Implementation Timeline

publish
1 May 2026
Transport Canada publishes TSD No. 139 Revision 1 and the revision becomes effective
sync_alt
1 May–31 Oct 2026
Manufacturers may follow the previous applicable requirements or Revision 1 during the transition
event_available
1 Nov 2026
Revision 1 reaches its mandatory compliance date

Related Categories